Past Events
January 30 Meeting with Al Geller and Sam Turner on Bowl Savers
President’s Corner – Steve Leblanc
Channel Islands Woodturners Art Show Submission Deadline
Saturday’s February 27th meeting at Levi’s is the deadline for submitting entries into our March Art Show at Proverbs Coffeehouse. If you can’t bring your entry/entries to the meeting, call Stephan Case-Pall (491-3660), Joel Oksner (443-0270), or Steve Leblanc (526-3840) to arrange a drop-off.
See January’s newsletter for more information about the show.
If you would like the Art Gallery to mail an art card to a friend or family member, send the e-mail the address to me at sml.woodturner@att.net. The Coffeehouse will mail up to 100 cards for us in addition to their own 600-piece mailing list. They will also give us blank postcards.
Stay tuned to more e-mail announcements about the show as we get closer to the event.
Show & Tell
We will be having Show & Tell. We will include your Art Show entries in the Show & Tell if you like.
Kind Regards,
Steve
-
-
VP Bob Fahrnbruch stood in for Steve Leblanc as MC
-
-
Stephen Case-Pall reported on preparations for the March art show
-
-
Jim Word is lining up the 2010 meeting dates and venues
-
-
Bruce Berger starts the Show &Tell with segmented work
-
-
John Ascheman turned accident into art work
-
-
Jim Word
-
-
Jim shows all the shaving generated without benefit of a bowl saver
-
-
Warren Brown
-
-
Warren: Multi-layer plywood bowl with tilted layers
-
-
Bob F.: Birdhouse
-
-
Robert Mitchell
-
-
Dave Staehli: Russan Olive – very hard
-
-
Visitor Sven from Anaheim
-
-
Gary Toro first to do reversed turned diamonds per AAW mag.
-
-
Robert Mitchell boxes, Michael Inham surface carving
-
-
Rick Caseman new member from Santa Maria
-
-
Friendly dispute over raffle numbers
-
-
Dave Hutter wins
-
-
Featured Demo: Al Geller with McNaughton system post
-
-
McNaughton most versitile but more difficult
-
-
How to stage the cuts and provide a way to chuck the pieces
-
-
Looks like a straight tool
-
-
Al with Woodcut system
-
-
Explaining how to set up offset center on Woodcut system
-
-
Woodcut tool in action – note the two cutter radii
-
-
Taking the plunge in Redwood
-
-
Sam Turner explained the Oneway system
-
-
Calculating the bottom thickness
-
-
The initial cut with external support
-
-
Now with the bottom support inside the groove
-
-
The resulting two pieces in Avocado
-
-
Sharpening the cutter tip
-
-
Closeup of Oneway system
-
-
Closeup of Oneway cutter – note negative rake tip
Related Articles
[gallery size="medium" best casino canada ids="6654,6655,6656,6684,6657,6658,6659,6661,6662,6663,6660,6664,6665,6666,6667,6668,6669,6670,6671,6672,6673,6674,6675,6676,6685,6677,6678,6679,6680,6682,6683,6686"]
[gallery size="medium" ids="9699,9700,9701,9704,9714,9702,9703,9705,9706,9707,9708,9709,9710,9711,9712,9713,9715,9716,9717"]
[gallery size="medium" ids="7050,7051,7052,7049,7053,7054,7055,7056,7057,7058,7059,7060,7061,7062,7063,7064,7065,7066,7069,7070,7067,7068,7071,7072,7073,7074,7075,7076,7077,7078,7079,7080,7081,7082"]
Meeting Information: No meeting in December The Holiday Social is December 9th for members and spouses only. Members have received information by email and phone. Seasons' Greetings to all and...