July 2014 – VC Fair

ByRon Lindsay July 30, 2014October 11, 2024

1-Frank. Blue means first, red second, and black third. HM for honorable mention.

1-Ascheman (the leading number is the class, i.e., Artistic/Carved)

1-Lindsay

1-Rascon

1-Rascon

Decorative-Class 2-Turner

2-Ascheman

2-Frank

2-Evans

2-Ritz

2-Lindsay

3-Ascheman

3-Lindsay

Collection-4-Frank

4-SheaTarn

4-Lindsay

6-Frank

6-SheaTarn

6-Lindsay

7-Lindsay

7-Rascon

7-Rascon

7-Frank

8-Lindsay

8-Evans

9-Frank

10-Turner

10-Lindsay

10-Frank

10-Evans

11-Ritz

11-SheaTarn

11-Lindsay

11-Frank

12-Evans, nominated for Best of Show

12-Lindsay

Dave Hergesheiner from Glendale club judged the entries

Linda E. was the recorder on July 22

Mark E. , Sam Turner, and Ron L. handled logistics and photography

Mark M. with anxious customer on Aug 9

Almost ready!

Test drive

Non-Judged display case

Next are pictures of the judged entries display case

John A. got a first for item on left and Joe R. got first for stacked books (non-woodturning categories)

Joanne W. and Joe R. in booth with Mark

Mark M. back on the lathe

Mark M.

Joe R. turns his tops stem first

Joanne W.

Joanne with knurling/spiral tool

December 2019 – Winter Party
ByRon Lindsay January 9, 2020October 11, 2024

Read More December 2019 – Winter Party
March 2019 – Bob Nolan
ByRon Lindsay March 23, 2019October 11, 2024

Read More March 2019 – Bob Nolan
January, 2007
Bynstryker@gmail.com January 1, 2007October 11, 2024

The first meeting of 2007 will be our own member, Sam Turner who says, “I think I told Joe Levy that I would be talking about finishing tricks. Unfortunately there aren’t many tricks so I guess that’s a misnomer. However, the answer to finishing woodturning projects is to know and understand what’s available, whether it’s…

Read More January, 2007
March, 2007
Bynstryker@gmail.com March 1, 2007October 11, 2024

Our March meeting features member and past president, Jim Rinde. Jim will speak on the use and abuse of epoxy resins in wood turnings. Jim writes “I have been using epoxy resins in my wood turning since 1988 (sometimes I have been successful and sometimes not). I started using them because they are materials that…

Read More March, 2007
July, 2004
Bynstryker@gmail.com December 1, 2004October 11, 2024

Meeting Information: Saturday, July 22 from 9:00 am Noon Jim Rinde: Un-natural Edge Turnings At Levi Mize Woodcraftsman’s Shop 162 Aviador Street #17+18, Camarillo, CA 93010 Aviador Street is N. of the Camarillo Airport and is reached from the Central Ave. exit off of US 101: go S. and turn left on Ventura Blvd. then…

Read More July, 2004
March, 2004
Bynstryker@gmail.com December 1, 2004October 11, 2024

Meeting Information: Saturday, March 27 from 9:00 am to Noon Hands-on Workshop at Russ Babbitt’s: Four lathes will again be available at Russ’s shop plus several different set-ups for sharpening turning tools. This is the second of three of these teaching sessions scheduled for this year. Come and take advantage of the one-on-one teaching. At…

Read More March, 2004