January 2014 – Hands-On

ByRon Lindsay January 1, 2014October 11, 2024

Carrie A. brought husband Don to join

Show-n-tell: Ron L. brought this shop-built leveling jig

Ron also showed off his new CBN grinder wheel shown here installed at home

David F. using glass tube inserts – brought hundreds to share

Black gesso on table leg

David’s work using brass and glass inserts

Joanne W. also making vases with glass tube inserts

Warren B. described how to hold vessel together with tape while hollowing

Al G. with Norfolk Island Pine bowl

Robert M. with heavy-duty icecream scoop

Robert – Two doorstops from one turning

Holder for phone/ipod

Bruce B. described how wood spalted unexpectedly

Mark E. with Acacia lidded bowl

Closeup of Mark’s work

Bruce O. with turned ornament

Bruce made own scraper tools with carbide inserts and metal handles

Sam T. discussing texturing methods

Jim R. resurrected this wood and epoxy “Alien” bowl

Show-n-Tell table – 1

Show-n-Tell table – 2

Show-n-Tell table – 3

Show-n-Tell table – 4

Al G. with thank-you notes from Cabrillo students

Don P. had faceshields to share

Wood raffle – Liquid Amber, Tipu, Ironbark galore

Hands-on session very well attended – cleanup in progress

October, 2006
Bynstryker@gmail.com October 1, 2006October 11, 2024

Meeting Information: Saturday, October 14th, from 9 am to 4 pm Linda Salter: Segmented Turning At Levi Mize Woodcraftsman’s Shop 162 Aviador Street #17+18, Camarillo, CA 93010 Aviador Street is N. of the Camarillo Airport and is reached from the Central Ave. exit off of US 101: go S. and turn left on Ventura Blvd….

Read More October, 2006
January 2015 – Betty Scarpino
ByRon Lindsay January 29, 2015October 11, 2024

Read More January 2015 – Betty Scarpino
April, 2006
Bynstryker@gmail.com December 1, 2006October 11, 2024

Meeting Information: Saturday, April 22nd Tips and Tricks plus Hands-on Workshop with Mentoring Program at Russ Babbitt’s from 9:00 am to ? with Lunch ($5 donation requested) Bring your own tools and face mask so you can practice with your own tools and learn to sharpen them. If you don’t have any yet you can…

Read More April, 2006
March, 2009
Bynstryker@gmail.com March 1, 2009October 11, 2024

For the swap meet, bring your excess wood and unused tools for sale to club members. Ten percent of the sale price goes to the club treasury. It might be wise to carpool if possible because parking was tight last year. Bring a chair. The February 28 meeting featured Al Geller demonstrating tips and tricks…

Read More March, 2009
May, 2003
Bynstryker@gmail.com December 1, 2003October 11, 2024

Meeting Information: Saturday, May 24th from 9:00 am to Noon Surface Decoration at Bob Pettit’s Bob will be teaching chip carving and other techniques. Remember to bring a chip carving or similar knife if you have one. The April meeting at Russ Babbitt’s was an outstanding success. After welcoming two guests, Howard Ford and Joe…

Read More May, 2003
January 2019 – Scott Hampton
ByRon Lindsay January 28, 2019October 11, 2024

Read More January 2019 – Scott Hampton