November 2019 – Kyle Carmona

ByRon Lindsay December 3, 2019October 11, 2024

Business meeting: new officers elected

Show and Tell table

Ron L. brought 3-sided lidded boxes like Cindy Drozda’s

Al G.

John As.

Rick H.: epoxy filled grooves

Decorative bands

Kyle demonstated his technique for making a segmented bowl with different woods and patterns on inside compared to outside

His full slide presentation can be found in the Members Only section of this website

Kyle uses his own spreadsheet to calculate all the angles and clearances. You may request a copy by emailing Kyle.

A single segment showing typical construction with waste wood

A glued-up ring – Gorilla Glue used for extended setup time

This model shows how segments join together. The bowl is actually built up one ring at a time. This also allows for brick stacking.

Two different cross-sections

Basic stock glued up with PVA glue. He cuts this at various angles on radial arm saw so that laminate joint is parallel to bowl wall.

Pine is used for the waste wood.

Zebrano

Walnut

Hickory

Segment sanding jig. He uses bandsaw to cut segments and then sands to final dimension

Kyle works in decimal so this ruler is essential

Wood raffle: Ash, etc.

October 2019 – Cindy Drozda
ByRon Lindsay October 26, 2019October 11, 2024

Read More October 2019 – Cindy Drozda
December, 2004
Bynstryker@gmail.com March 1, 2004October 11, 2024

Meeting Information: We have no regular meeting in December and will start again on January 22, 2005 with a Hands-On-Session at Russ Babbitt’s’ home. Check back in early January for details. We are having our 4th Annual Holiday Social on Saturday, December 4th for Members and Spouses at 6:00 p.m. This is a potluck and…

Read More December, 2004
January, 2008
Bynstryker@gmail.com January 1, 2008October 11, 2024

Note that our first Hands-On-Workshop for the year is on the 3rd Saturday, one week earlier than our usual meeting day. As noted above in blue our agreement with the school and due to the AAW insurance policy that covers our activities only current members of the AAW will be allowed to use the lathes. …

Read More January, 2008
August, 2005
Bynstryker@gmail.com December 1, 2005October 11, 2024

Meeting Information: Saturday, August 27th, from 9 am to Noon Jim Rinde: Turning a hollow form with a boring bar At Levi Mize Woodcraftsman’s Shop 162 Aviador Street #17+18, Camarillo, CA 93010 Aviador Street is N. of the Camarillo Airport and is reached from the Central Ave. exit off of US 101: go S. and…

Read More August, 2005
March 2023 – Sally Ault
ByRon Lindsay March 26, 2023October 11, 2024

Read More March 2023 – Sally Ault
June 2017 Meeting – Sharpening
ByRon Lindsay June 24, 2017October 11, 2024

Read More June 2017 Meeting – Sharpening