November 2018 – Lyle Jamieson – Webinar

ByRon Lindsay November 17, 2018October 11, 2024

Dave S. setting up half-day webinar with Lyle Jamieson in Michigan

We asked questions using pass-around mic

Lyle prefers to start by turning between centers for best orientation and balance. He uses the Robust cup bowl drive center rather than a spur drive.

Showing triple screen presentation

Shaping concave face for faceplate

Explaining why he uses faceplate instead of scroll chuck

Secured with eight #12 panhead sheet metal screws

He uses peeling cut on side grain

Explaining strategy for lowest vibration by keeping as much mass as possible and working right to left

Bottom of vessel is yet to be revealed

Bruce brought his Jamieson jig to show during break

Refiining shape with shear scrape with gouge

Drilling center short of desired bottom

Now hollowing with Jamieson jig

Using carbide cutter held at sheering angle

Setting the laser relative to the cutter for proper wall thickness

Using the laser to judge wall thickness

Completing shape, hollowing and parting off

Reverse and complete bottom except for tailstock nub (Robust live center)

Nub to be cut off and sanded

Sam asked for comments on webinar format at closing

May, 2005
Bynstryker@gmail.com December 1, 2005October 11, 2024

Meeting Information: Sunday, May 15, from 9 am to 4 pm Special Demonstration Andi Wolfe: Turning and Surface Decoration At Levi Mize Woodcraftsman’s Shop 162 Aviador Street #17+18, Camarillo, CA 93010 Aviador Street is N. of the Camarillo Airport and is reached from the Central Ave. exit off of US 101: go S. and turn…

Read More May, 2005
September 2018 – Paulo Marin Tools
ByRon Lindsay October 1, 2018October 11, 2024

Read More September 2018 – Paulo Marin Tools
July 2013- Summer Party
ByRon Lindsay July 3, 2013October 11, 2024

Read More July 2013- Summer Party
February, 2004
Bynstryker@gmail.com December 1, 2004October 11, 2024

Meeting Information: Saturday, February 28 from 9:00 am to 4:00 p.m. All day special Demonstration by Steve Dunn at Chuck Stevenson’s Shop: meeting details below The first meeting of the year started us off with an enthusiastic gathering of over 20 members and two guests new to our club: Steve Garret and Stephen Case-Pall. Stephen…

Read More February, 2004
November 2022 Meeting
ByRon Lindsay November 20, 2022October 11, 2024

Read More November 2022 Meeting
October, 2006
Bynstryker@gmail.com October 1, 2006October 11, 2024

Meeting Information: Saturday, October 14th, from 9 am to 4 pm Linda Salter: Segmented Turning At Levi Mize Woodcraftsman’s Shop 162 Aviador Street #17+18, Camarillo, CA 93010 Aviador Street is N. of the Camarillo Airport and is reached from the Central Ave. exit off of US 101: go S. and turn left on Ventura Blvd….

Read More October, 2006