April 2018 – Mike Mahoney – Channel Islands Woodturners

Sam T. introducing our demonstrator Mike Mahoney (clock not working)

Mike started demo showing multi-bowl coring using the McNaughton Center Saver system on a claro walnut blank

This shows the graft line between the root stock and Iranian walnut

This strong banding is characteristic of claro walnut

McNaughton tool (available from Craft Supplies USA)

Mike’s gouge grind – he likes coarse grinding wheel

Instant gallery items – Mike’s bowls in background

Robert M.’s footed olive bowl – Note the butterfly patches

Another of Mike’s Walnut bowls with graft line

Mike’s mug – see Youtube for video on how to make

Mike’s bowl examples and instant gallery table

Wood raffle items Acacia, Pine, and Walnut

Project 2: Large Valley (white) Oak blank for platter

Cutting large diameter but shallow rabbet for Vicmarc chuck

Shear scraping the ogee. Bottom center is bowed out for extra thickness.

Finish is walnut oil and beeswax mixture.

Hollowing with the Kelton hollowing tool (double-ended)

Kelton hollowing tool – bent (Craft Supplies)

This shows the mistletoe figure best. Ready for threading

Using the “female” chaser (Mike likes 16 tpi)

Starting the thread using the “male” chaser

This is threaded chuck to hold the finial by its threads

Mike’s recommended foot sizes for various applications

Project 4: “Calabash” shape (rounded bottom) large bowl in Black Oak

Exterior shaped showing tenon to hold for hollowing

Hollowing with gouge to 1/8″ thickness to bottom

Chips really flying – Joe R. takes cover

Hollowed – Mike sanded outside only since wet

Preparing jam chuck to remove tenon and final shape

Similar Posts

November 2019 – Kyle Carmona
ByRon Lindsay December 3, 2019October 11, 2024

Read More November 2019 – Kyle Carmona
February, 2008
Bynstryker@gmail.com February 1, 2008October 11, 2024

The hands-on-turning session at the January 19th meeting was well attended with mostly our newer members wanting the chance to work with mentors on their turning skills. It is that time of year for new and continuing members to pay their club dues of $25 to treasurer Ron Lindsay. Please mail them to him or bring…

Read More February, 2008
October, 2006
Bynstryker@gmail.com October 1, 2006October 11, 2024

Meeting Information: Saturday, October 14th, from 9 am to 4 pm Linda Salter: Segmented Turning At Levi Mize Woodcraftsman’s Shop 162 Aviador Street #17+18, Camarillo, CA 93010 Aviador Street is N. of the Camarillo Airport and is reached from the Central Ave. exit off of US 101: go S. and turn left on Ventura Blvd….

Read More October, 2006
June 2016 – Sam Turner
ByRon Lindsay June 27, 2016October 11, 2024

Read More June 2016 – Sam Turner
April, 2005
Bynstryker@gmail.com December 1, 2005October 11, 2024

Meeting Information: Saturday, April 16th, from 9 am to Noon Art Waldinger: How to photograph you own work At Levi Mize Woodcraftsman’s Shop 162 Aviador Street #17+18, Camarillo, CA 93010 Aviador Street is N. of the Camarillo Airport and is reached from the Central Ave. exit off of US 101: go S. and turn left…

Read More April, 2005
August, 2003
Bynstryker@gmail.com December 1, 2003October 11, 2024

Meeting Information: Saturday, August 23rd from 9:00 am to Noon Natural Edge Bowls: 101 at David Frank’s 166 Estaban Drive, Camarillo, CA 93010 (see below for more details about the meeting) At the July 12th meeting President Al Geller led us in a discussion of our experiences at the AAW Symposium last month. Thanks…

Read More August, 2003