June, 2015 – Brad Adams

ByRon Lindsay June 22, 2015October 11, 2024

Good turnout for the Brad Adams all-day demo. Boxes of Madrone and Maple burl cutoffs for sale.

President Dave S.

Mark E. discussed plans for the county fair booth and display

Show and tell time

President’s challenge: Rick H. used barley router bit to make candle holder using lathe jig.

Using same bit to scallop edge of bowl from board. This is his indexing guide.

The final product

Rick wins the $50 gift certificate as the only legal entry.

John A. with pierced carving.

Joanne W. made Tipu bowl for our web designer Nathan S.

John showed how he plugged bottoms for end grain

His latest pierced carving.

Bruce B. with his latest (larger) Robert Craig style creation

Showing tiger eye cabochon in lid

Jim R. with roasted Jacaranda lidded box with top top

Charcoal hollowform

Tucker G.: segmented platter

Bruce will take copies of Betty Scarpino videos to her at the AAW Symposium

Brad Adams from Benicia starts demo with how he handles heavy logs in the field

Lifting a log to pickup bed level with hydraulic motorcycle jack

On to the saw buck

He lets the log drain on end for about a week covered but not sealed

How the wood moves with the conventional roughout – Black Oak

What happens if you don’t relieve the stress from tangential shrinkage

Save the quartersawn center section for small objects

No “birthday cakes” please because they always crack even if sealed

Planning the cuts for a bowl blank

An opening in the bark for a spur center

Cut at 45 degrees to keep the shavings short

Uses cardboard circles instead of compass as cutting guide

Prefers to shape using chainsaw instead of bandsaw for safety

Trimming with electric chainsaw

Detail of sawbuck

The roughout: start between centers

Likes 2 ft steel metric rule to layout thickness using 10% of diameter

Brad uses only Ellsworth gouge for roughing green wood

Showing the tenon and bowl base at one third of diameter

Completed cork oak bowl blank – he seals all surfaces

Switching to dried Madrone blank

Smoothing outside with thin flexible steel scraper

In dry wood Brad prefers double bevel conventional gouge – cleaner cut

Damping vibration – note fingerless gloves – Rick H. suggested using teflon pad

At the bottom using a 65 deg bevel on gouge

Passive sander

Hand sanding for creating concentric sanding pattern for final finish

Brad cut two grooves and wire burnt them. Now using hot coil “vaporizer” to burn in texture between the rings

This burner much hotter than standard woodburner so goes much faster

So hot that it flames up!

Completed bowl left for club raffle. Surface extremely smooth – 600 grit or finer

With black shoe dyed maple burl hollow form – faux Buckeye

Example pieces on his display table – Maple, Madrone, Acacia, Cork Oak, Ironbark Euc

Various bowl blanks for sale

February, 2011

February, 2011

Bynstryker@gmail.com February 1, 2011October 11, 2024

Future Events March 26, 9 am – 12 pm Photographing Your Woodturnings – Art Waldinger at Cabrillo Middle School President’s Message We had a great meeting in January with approximately 45 showing up, and we signed up four new members. Welcome Mimi and Phil Allin, Tim Burrett, and Cindy Zanotti. We also had over twenty…

February, 2010

February, 2010

Bynstryker@gmail.com February 1, 2010October 11, 2024

Past Events January 30 Meeting with Al Geller and Sam Turner on Bowl Savers President’s Corner – Steve Leblanc Channel Islands Woodturners Art Show Submission Deadline Saturday’s February 27th meeting at Levi’s is the deadline for submitting entries into our March Art Show at Proverbs Coffeehouse. If you can’t bring your entry/entries to…

February 2016 – Chris Pytlik

February 2016 – Chris Pytlik

ByRon Lindsay February 28, 2016October 11, 2024

January 2017 – Kevin Wallace

January 2017 – Kevin Wallace

ByRon Lindsay January 29, 2017October 11, 2024

March, 2009

Bynstryker@gmail.com March 1, 2009October 11, 2024

For the swap meet, bring your excess wood and unused tools for sale to club members. Ten percent of the sale price goes to the club treasury. It might be wise to carpool if possible because parking was tight last year. Bring a chair. The February 28 meeting featured Al Geller demonstrating tips and tricks…

VC Fair Judging – 26 July 2022

VC Fair Judging – 26 July 2022

ByRon Lindsay July 27, 2022October 11, 2024