February, 2015 – Kelly Dunn

Bynstryker@gmail.com February 28, 2015October 11, 2024

March meeting

Ex Pres Chuck H. gifts Pres Dave S. with turned bell

Show and Tell: Ron L.: Juniper vase and spiral finials, John A.: Scarpino pods

President Dave S.

Show and Tell: David F.: Dyed goblet

John A.: From Scarpino demo

John A.

Joe R.: Segmented hollowform

Jim R.: Epoxy inlay

Roasted wood calabash

Jim’s roasted pine to enhance chatoyance

Rick H.

Rick H.: Bottle stoppers

Kelly Dunn from Hawaii

Kelly’s NIP pieces

Lidded Calabash

Starting project with dried blank of Norfolk Island Pine (NIP)

Filling the knots with CA glue

Power sanding

Checking thickness and knot tightness with light

Kelly gets a very thin and smooth surface

This is translucence sought after finishing in oil

Jig to turn the bottom

Power sanding the inside

September 2015 – Al Geller
ByRon Lindsay September 26, 2015October 11, 2024

Read More September 2015 – Al Geller
July 2015 – Summer Party
ByRon Lindsay July 24, 2015October 11, 2024

Read More July 2015 – Summer Party
December 2019 – Winter Party
ByRon Lindsay January 9, 2020October 11, 2024

Read More December 2019 – Winter Party
November, 2003
Bynstryker@gmail.com December 1, 2003October 11, 2024

Meeting Information: Saturday, November 22nd from 9:00 am to Noon Working with Epoxy: Part II at Jim Rinde’s: Last year in Part I, Jim explained the chemical aspects of epoxy and taught us the techniques involved in preparation of epoxy and wood turning blanks. This year in Part II he will show us the techniques…

Read More November, 2003
May, 2003
Bynstryker@gmail.com December 1, 2003October 11, 2024

Meeting Information: Saturday, May 24th from 9:00 am to Noon Surface Decoration at Bob Pettit’s Bob will be teaching chip carving and other techniques. Remember to bring a chip carving or similar knife if you have one. The April meeting at Russ Babbitt’s was an outstanding success. After welcoming two guests, Howard Ford and Joe…

Read More May, 2003
September, 2003
Bynstryker@gmail.com December 1, 2003October 11, 2024

Meeting Information: Saturday, September 20th from 9:00 am to 2:00 pm with lunch Bill Haskell demonstrating Sculptural, Multicentric Face Plate Turning at Dan Halpert‘s (see below for more details about the meeting) At the August 23rd meeting Vice President Jim Rinde presided. Thanks go to Sam Turner for bringing refreshments. We decided to keep the …

Read More September, 2003