Meeting Information: Saturday, July 22 from 9:00 am Noon Jim Rinde: Un-natural Edge Turnings At Levi Mize Woodcraftsman’s Shop 162 Aviador Street #17+18, Camarillo, CA 93010 Aviador Street is N. of the Camarillo Airport and is reached from the Central Ave. exit off of US 101: go S. and turn left on Ventura Blvd. then…
Meeting Information: Saturday, August 28th from 9:00 am to Noon Hands-on Workshop with emphasis on teaching tool use: we will have 4 lathes set up and a specific teaching program is planned for new turners. at Russ Babbitt’s Note that this meeting is not at Levi Mize’s Shop: we will return there next month….
Meeting Information: Saturday, March 27 from 9:00 am to Noon Hands-on Workshop at Russ Babbitt’s: Four lathes will again be available at Russ’s shop plus several different set-ups for sharpening turning tools. This is the second of three of these teaching sessions scheduled for this year. Come and take advantage of the one-on-one teaching. At…
Meeting Information: Sunday, September 19 from 8 am to 4 pm Stuart Batty: Special Demo Reservations required see below! Also note the early start time! At Levi Mize Woodcraftsman’s Shop 162 Aviador Street #17+18, Camarillo, CA 93010 Aviador Street is N. of the Camarillo Airport and is reached from the Central Ave. exit off of…
Meeting Information: Saturday, October 23, from 8 am to 4 pm Allan Batty: Special Demo ALSO Sunday, November 7, from 8 am to 4 pm Soren Berger: Special Demo Reservations required see below! Also note the early start times! At Levi Mize Woodcraftsman’s Shop 162 Aviador Street #17+18, Camarillo, CA 93010 Aviador Street is N….
Meeting Information: Saturday, April 24 from 9:00 am to Noon Russ Babbitt: Making Lidded Boxes At Levi Mize Woodcraftsman’s Shop 162 Aviador Street #17+18, Camarillo, CA 93010 NOTE THIS IS A NEW LOCATION BRING YOUR OWN CHAIR OR SIT ON THE FLOOR The Club will be holding many of our meetings here thanks to Levi. …
Meeting Information: Saturday, February 28 from 9:00 am to 4:00 p.m. All day special Demonstration by Steve Dunn at Chuck Stevenson’s Shop: meeting details below The first meeting of the year started us off with an enthusiastic gathering of over 20 members and two guests new to our club: Steve Garret and Stephen Case-Pall. Stephen…
Meeting Information: Saturday, May 22 from 9:00 am to 4:00 pm Brad Stave: Surface Decoration $15 fee for this meeting: This will include lunch and a hands-on-workshop using various tools! At Levi Mize Woodcraftsman’s Shop Over 30 people attended the April meeting at our new venue. Thanks to Levi Mize for making his shop available,…
Meeting Information: Saturday, January 24 from 9:00 am to Noon Hands-on Workshop with emphasis on tools and sharpening at Russ Babbitt’s: The first meeting of the year will start us off with a teaching session for new, beginning, and advanced turners to share ideas, techniques, and mistakes we have made or will make. Four lathes…
Meeting Information: Sunday, November 7, from 8 am to 4 pm Soren Berger: Special Demo Reservations required see below! Also note the early start times! At Levi Mize Woodcraftsman’s Shop 162 Aviador Street #17+18, Camarillo, CA 93010 Aviador Street is N. of the Camarillo Airport and is reached from the Central Ave. exit off of…
Meeting Information: Saturday, June 26 from 9:00 am Noon Jim Rinde: Un-natural Edge Turnings At the last moment this was postponed until next month. Instead Ron Lindsay presented a talk on the effect of grain orientation on turning bowls with wet wood. At Levi Mize Woodcraftsman’s Shop The May 22nd meeting was again held…
Meeting Information: We have no regular meeting in December and will start again on January 22, 2005 with a Hands-On-Session at Russ Babbitt’s’ home. Check back in early January for details. We are having our 4th Annual Holiday Social on Saturday, December 4th for Members and Spouses at 6:00 p.m. This is a potluck and…